PRODUCT

FORUM-500 for two-stroke engines is designed for motorcycles, go-karts, all-terrain vehicles (ATVs), snowmobiles, off-road vehicles, chainsaws, lawnmowers, and other two-stroke engines.

The application effects of FORUM-500 for two-stroke engines include:

·Protection of engine components from friction and wear.
·Increase in engine power by 20%.
·Protection of the engine from corrosive environments.
·Reduction of friction coefficient in the oil by 17%, up to 100 times lower friction in the absence of oil.
·Reduction of carbon formation by 2 times.
·Decrease in noise and vibrations by 2-8 decibels.
·Savings of up to 20% on fuel consumption.

Ingredients: UPTFE-FORUM™ and deep cleaning base oil.

To use FORUM-500 for two-stroke engines, follow the procedure below:
1. Drain the old engine oil.
2. Shake the small bottle vigorously until the active components of UPTFE-FORUM™ are distributed throughout the liquid volume.
3. Pour the FORUM-500 additive into the gasoline or a separate oil tank at a ratio of 1:10 (FORUM to oil), depending on the engine lubrication system. It is normal to have a small amount of sediment at the bottom of the empty bottle after use.
4. Allow the engine to run for at least 10 minutes to ensure even distribution of the additive throughout the system.

One bottle is designed for 2.5 liters of oil.